Wednesday, October 9, 2019

High Performance Concrete Reinforced with Glass Fibres Essay

High Performance Concrete Reinforced with Glass Fibres - Essay Example In order to achieve performance-related properties specific to performance in HPC, attention should be directed to the combination of performance requirements (such as strength limits and permeability) and prescriptive requirements (such as air content limits or dosage of supplementary cementing material) (Ferraris and Lobo, 1998). Depending on the HPC mixtures examples of HPC include High-early-strength concrete, high-strength concrete, high-durability concrete, self-compacting concrete and reactive-powder concrete. High-Early-Strength Concrete (HESC) High-Early-Strength Concrete (also known as fast-track concrete), achieves its specified strength at an earlier age compared to normal concrete. This earlier age is the time period in which a specified strength should be achieved and may range between a few hours (or even minutes) to several days. Although it can be achieved using traditional concrete ingredients and concreting practices, the production of HESC will sometimes require s pecial materials or techniques. Depending on the age at which the specified strength must be achieved and on job conditions, one or a combination of the following can be used in the production of HESC: type III or He high-early strength cement, high cement content, low water-cementing materials ratio, higher curing temperature, higher freshly mixed concrete temperature, silica fume, chemical admixtures, special rapid hardening cements, insulation to retain heat of hydration, and/or steam and autoclave curing. High-early-strength concrete is used for prestressed concrete to allow for early stressing; precast concrete for rapid production of elements; high-speed cast-in-place construction; rapid form... High-Early-Strength Concrete (also known as fast-track concrete), achieves its specified strength at an earlier age compared to normal concrete. This earlier age is the time period in which a specified strength should be achieved and may range between a few hours (or even minutes) to several days. Although it can be achieved using traditional concrete ingredients and concreting practices, the production of HESC will sometimes require special materials or techniques. Depending on the age at which the specified strength must be achieved and on job conditions, one or a combination of the following can be used in the production of HESC: type III or He high-early strength cement, high cement content, low water-cementing materials ratio, higher curing temperature, higher freshly mixed concrete temperature, silica fume, chemical admixtures, special rapid hardening cements, insulation to retain heat of hydration, and/or steam and autoclave curing. High-early-strength concrete is used for prestressed concrete to allow for early stressing; precast concrete for rapid production of elements; high-speed cast-in-place construction; rapid form reuse; cold-weather construction; rapid repair of pavements to reduce traffic downtime; fast-track paving; and several other uses. In fast-track paving, use of HESC allows traffic to open within a few hours after concrete is placed.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.